These connectors provide easy and quick termination to any high-speed CAN/CAN FD product. The connectors are used when a CAN node without internal terminal needs to be terminated or if no CAN node is connected at the end of the CAN bus. According to ISO 11898-2, high-speed CAN buses/systems must be terminated at their ends by resistors. The D-Sub termination connector can also be used for CAN FD buses.

Features and benefits

■ 120 Ohm termination resistor between pin 2 (CAN-L) and pin 7 (CAN-H)
■  9-pin female D-Sub plug
■  Pin assignment 1-to-1
■  Suitable for the use in CAN and CAN FD buses
■  Easy use between existing cable connection