The Intesis DALI-2 to KNX TP PRO Gateway is a multi-master application controller for DALI-2 ballast integration into a KNX system. It enables standard switching/dimming, color control, emergency lighting management, and operating hours recording, with error analysis for interoperability in building automation setups.

Features and benefits

Interoperability between DALI-2 and KNX systems
Multiple configuration methods are available: ETS+DCA, web interface, and directly on the device. The gateway is DALI-2 and KNX certified.

Simplified installation without extra power supply
Embedded DALI Power Supply for the connected devices.

Full lighting control for the building user’s comfort
Broadcast control, group control, and single ECG control.

Advanced Human-Centric Lighting (HCL) setup for occupants’ wellness
Color control features include RGBW, tunable white, HSV color control, and x/y – Color Space.

Reliable Emergency Lighting management
Supports single-battery emergency lights (EN 62386-202) and central battery emergency lighting systems.

Enhanced security for data communication
KNX Data Secure is supported, ensuring safe and encrypted communication in building automation networks.

IoT and Smart Building Ready
MQTT / IoT compatibility, allowing integration with IoT platforms and smart building systems.

Flexible input device support for automation
Supports motion/brightness sensors, push buttons, and generic inputs for customizable automation and control. Virtual Input Devices can be settled.

Technical Specifications

Identification & Status

Brand: Intesis
Country of Origin: Germany
HS Code: 8517620000
Dual Usage (ERP): No
Export Control Classification Number (ECCN) (ERP): EAR99
Item Number: INKNXDAL0640300
Predecessor: INKNXDAL0640200

Certifications & Standards

CE: Yes
UL: No
KC: No
WEEE Category: IT and telecommunications equipment
CB: No
UKCA: No
UKPSTI: No
BTL: No
KNX: Yes
DALI-2: Yes
ETIM Classification: EC001604

General

Content of Delivery: Intesis gateway, installation Manual and 1 heat shrinkable tubing 1.2 x 2cm for the bus cable.
Net Width (mm): 72 mm
Net Height (mm): 90 mm
Net Depth (mm): 58 mm
Net Weight (g): 157 g
Mounting: DIN rail mount (bracket included), Wall mount
Input Voltage (V): 100 to 240 V, 50 to 60Hz - AC or DC
Power Consumption (W): 8W
Power Connector: 3-pole
Isolation Voltage (kV): Double Insulation (5,3kV) between KNX-MAINS/ DALI-MAINS / KNX-DALI Safety Insulation (4kV) Between IP-DALI kV
Operating Temperature °C Min: -5 °C
Operating Temperature °C Max: 45 °C
Storage Temperature °C Min: -25 °C
Storage Temperature °C Max: 55 °C
Housing Materials: Plastic
Packaging Material: Cardboard
Warranty (years): 3 years

Configuration: Multiple configuration methods are available: ETS+DCA, web interface, and directly on the device.

Capacity: Up to 64 ECGs plus up to 8 DALI-2 motion detectors or light sensors can be individually controlled. According to EN 62386-103 ed2, the gateway supports multi-master operation. The ECGs can also be controlled in 16 groups.

Installation Conditions: This gateway is designed to be mounted inside an enclosure. If the unit is mounted outside an enclosure, precautions should always be taken to prevent electrostatic discharge to the unit. When working inside an enclosure (e.g., making adjustments, setting switches, etc.), typical anti-static precautions should always be followed before touching the unit.

Physical Features

Contains Battery: No